The D Type range of MF induction heaters from Inductelec provides a flexible, cost effective and reliable answer to any medium frequency induction heating requirement.

D-Type MF Induction Heater

The Range

Offered in a range of powers from 100kW to 600kW with operating frequencies of 1kHz to 10KHz the D-Type has been designed to operate into a wide range of coil impedances which can be utilised in a range of traditional and niche induction heating applications.

The D-Type range of induction heating power units have been developed to incorporate the very latest techniques and industry advances to ensure maximum energy efficiency and sys-tem safety.

Operator control is via a purpose-designed membrane panel which features 5 internal programmable power control and time settings.

Diagnostic panels are included for cubicle temperature, water temperature, water-flow, last power, elapsed time, etc, to aid with fault finding and reporting.

In developing the D-Type, our engineers were tasked with optimising the flexibility, operating range and reliability of the unit. The resulting system answers many of the flexibility limitations traditionally associated with this type of equipment.

Overall control is achieved utilising a microcontroller. Auxiliary communication can be provided via a dedicated, isolated CAN-bus based communication system, or via a standard

0-5V power control signal in conjunction with logic signals for power-on and fault feedback to en-ble ease of interface to external control systems.

To complement the D-type power units we are able to supply a range of standard and be-spoke handling systems. These include progressive hardening solutions, conveyors, walking beams and rotary tables all of which can be manually or automatically fed.

D-Type MF Induction Heater


Digital control Easily maintained including remote fault finding
Remote work-heads up to 20m High mains input power factor
Changeover switch options Easily interfaced to a wide range of PLC and temperature control systems
Consistent repeatable results Comprehensive water cooling monitoring and protection

Typical applications

Forging Billet heating Soldering and brazing
Progressive hardening Wire heating Thermal simulation
Single shot hardening Paint drying Weld annealing and pre heating
Shrink fitting Tube bending Strip heating
Bar end heating Wire rope heating Mass heating

D-Type Power Units

Power Dimensions Frequency Mains Supply
10kW to 600kW 2000 x 1000 x 2200 H 3 to 10kHz Please contact us